![]() ![]() Shut Supply Valve: Make sure that the supply valve is turned on to allow water to flow into the refrigerator. It is also possible that the water tube connecting the hose and dispenser has frozen over due to incorrect temperature settings. There may be insufficient water pressure coming from the water source and this causes poor water flow toward the refrigerator. It is possible for the waterline to experience clogging caused by either lack of water flow from the source or the hose may be bent or damaged. These issues are not difficult to troubleshoot and future maintenance will be an easy task as well. The waterline can encounter multiple issues that prevent water from properly flowing from its source to the refrigerator. If you do find damage in the gasket, it needs to be replaced. Inspect it for any dirt buildup or damage.Ĭlean the gasket with a soap-water formula if you find dirt buildup. The door gasket is the rubber seal of your refrigerator doors. the interior lights are still lit up), then the switches are faulty. If the refrigerator does not respond to the magnets (e.g. To check if yours needs replacing, you can test it by placing magnets in front of the switches. The common causes for this include a faulty reed switch and a dirty or broken door gasket.Ī faulty door switch needs to be replaced with a new one. ![]() The dispenser does not work when your refrigerator doors are detected as open. If the switch is confirmed to be broken, it is highly recommended to have a professional replace the switch as the electronics are delicate and difficult to tamper with. Any sort of damage or cracks in the housing requires repairs and/or replacement from a professional.Ĭheck if your dispenser switch is broken by using a multimeter to test for continuity. The filter housing has to be intact and in good condition. Other brands may be an incorrect fit with Samsung refrigerators. Make sure that the water filter is a Samsung-branded water filter. Replace damaged filters with new ones, and make it a routine to perform maintenance on the water filter every 6 months. Inspect your water filter for any damage and cracks. It needs to be snapped into place and should not feel loose when in the housing. You can disable Child Lock by pressing the Child Lock button for 3 seconds and then release.Ĭheck if the filter is installed correctly. The entire control panel is disabled if this is activated, and that includes the option to dispense water. One of these settings is the Child Lock mode. Some of these settings lock the dispenser from working. The settings on your refrigerator’s control panel affect the dispenser’s functionality. Make sure that the refrigerator is set to 38☏ and its freezer to 0-10☏ to avoid freezing the tube. The water tube could also be frozen and hence, will not allow water to flow. Use a water pressure gauge to check - the pressure needs to be at least 20 psi. Make sure that the water source has enough pressure to send water to your refrigerator. Open the valve of your refrigerator’s water supply.Ĭheck if the hose connecting the water supply and refrigerator has any sharp bends or damage. We’ve listed the causes and solutions for each one of them to help you get started. Whatever the problem is, don’t worry, we’re here to help and guide you along the way. We even advise you to seek professional help if you find trouble following the instructions yourself. If these are what causes the dispenser to have problems, it’s recommended to carefully take the required steps to fix them. The dispenser lock may have incorrect settings, the water filter could be the issue, the dispenser switch is broken, or the door switch is malfunctioning. Problems related to the dispenser system are the more complex reasons for your water dispenser’s issues. It should only take some troubleshooting and a few minor adjustments to allow the water to flow into the dispenser properly. It is common for the dispenser to malfunction because your waterline encountered multiple issues such as clogging and damaged components.Īll you need to do to fix these issues is to turn your attention to your refrigerator’s water source. ![]() The source of water for your refrigerator’s dispenser needs to be properly checked and maintained. The waterline may have clogged and damaged segments, while the dispenser system may encounter errors from control panel settings, water filter issues, and switch failures. ![]() Your Samsung refrigerator’s water stopped working because it encountered problems with its waterline and dispenser system. What causes my Samsung refrigerator to fail in dispensing water? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |